Lab 10-16: Interface Configuration Consistency with EtherChannels
Inspect member-port settings for EtherChannel consistency and troubleshoot mismatches that prevent bundling.
Lab Overview
- Lab Number: 10-16
- Lab Name: Interface Configuration Consistency with EtherChannels
- Lab Difficulty: Rated 6/10
- Approximate Time: 20 minutes
- Preferred Image: Layer 2 switch image supporting EtherChannel and LACP
- Chapter: Chapter 10 – EtherChannel Configuration
- Figure Reference: Figure 10-11
Objective
- Understand the importance of consistent interface configurations within an EtherChannel.
- Identify and troubleshoot issues caused by interface mismatches.
- Configure and verify dynamic EtherChannels using LACP.
Scenario Description
Two switches, SW1 and SW2, are connected using a Layer 2 EtherChannel configured with LACP. The channel is set up to use two interfaces on each switch. However, to simulate and troubleshoot EtherChannel misconfigurations, VLAN mismatches will be introduced on one of the interfaces on SW1. This lab demonstrates how configuration inconsistencies can cause ports to be excluded from the EtherChannel.