CCNA EVE-NG
Free member

Lab 29-2: Configuring Static IPv6 Route Using Outgoing Interface

Configure a static IPv6 route using an outgoing interface and verify the route and destination reachability.

Lab Overview
  • Lab Number: 29-2
  • Lab Name: Configuring Static IPv6 Route Using Outgoing Interface
  • Lab Difficulty: Intermediate
  • Approximate Time: 40 minutes
  • Preferred Image: Cisco IOS 15.x (EVE-NG)
  • Lab on: Chapter 29 – IPv6 Static Routing
  • Figures: Based on Figure 29-2
Objective

By completing this lab, you will:

  • Understand how Static IPv6 routes work using an outgoing interface.
  • Configure static routes on R1 to reach the subnet behind R2.
  • Compare two static routing methods:
  • Using only the outgoing interface.
  • Using the next-hop address.
  • Verify and troubleshoot static routing in IPv6 networks.
Scenario Description

In this lab, you will configure static IPv6 routes on R1 to reach Subnet 2 (2001:DB8:1111:2::/64) located behind R2. You will use two different methods:

0