CCNA EVE-NG
Free member

Lab 29-3: Configuring Static IPv6 Route Using Link-Local Address with an Outgoing Interface

Configure an IPv6 static route using a link-local next-hop address together with an outgoing interface.

Lab Overview
  • Lab Number: 29-3
  • Lab Name: Configuring Static IPv6 Route Using Link-Local Address with an Outgoing Interface
  • Lab Difficulty: Intermediate
  • Approximate Time: 45 minutes
  • Preferred Image: Cisco IOS 15.x (EVE-NG)
  • Lab on: Chapter 29 – IPv6 Static Routing
  • Figures: Based on Figure 29-3
Objective

By completing this lab, you will:

  • Understand how to configure static IPv6 routes using Link-Local addresses.
  • Learn why Link-Local next-hop addresses require an outgoing interface in IPv6 routing.
  • Compare two static routing methods:
    • Using Global Unicast Address (GUA) as the next-hop.
    • Using Link-Local Address (LLA) with an outgoing interface.
  • Test IPv6 connectivity and verify static route functionality.
Scenario Description

In this lab, you will configure static IPv6 routes on R1 to reach Subnet 2 (2001:DB8:1111:3::/64), which is behind R3. You will test two different routing methods:

0